Question: What Is The Most Important And Safest Thing A Driver Should Do Just Before Driving Away?

When approaching a roundabout should a driver yield?

Remember, in a multi-lane roundabout, you must yield to both lanes of traffic.

Once a gap in traffic appears, merge into the roundabout and proceed to your exit.

Look for pedestrians and use your turn signal before you exit.

If there is no traffic in the roundabout, you may enter without yielding..

Where should you avoid overtaking?

Never Overtake:where the road ahead narrows.where there are road junctions or driveways from which a vehicle could pull out in front of you.where you cannot see the road ahead to be clear i.e. when approaching a bend, the brow of a hill, a dip in the road or a hump back bridge.where traffic is queuing.More items…

What is the most difficult driving season?

WinterWinter is the most difficult driving season and requires extra caution from drivers. It is important to consistently check your antifreeze and windshield washer fluid levels. Using snow tires can increase a vehicle’s traction on the surface of slippery roads.

Who goes first at roundabout?

Does traffic approaching from one direction have priority over traffic approaching from another direction? The only priority rule is that drivers inside the roundabout have the right-of-way over any driver entering the roundabout, regardless of approach direction. Every entrance has a yield sign for approach vehicles.

What should a driver do before entering a tunnel?

Before driving through a tunnel, what should a driver do?Check that you have sufficient fuel.Disengage the global positioning system (GPS).Turn on side lights only.Register at the first tunnel station.

When must a vehicle yield to a pedestrian?

Vehicles must yield to pedestrians in marked or unmarked crosswalks. This includes remaining stopped at least one lane from the person crossing the street. That means not driving around them even if there is room to do so. Attempting to pass a vehicle stopped for a pedestrian is also unlawful.

How far away should you signal when you turn in seconds?

Before you stop, turn or change lanes, let the other drivers know what you are going to do by signaling. You can signal with your hand and arm or with your vehicle’s turn signals and brake lights. You should signal at least 100 feet before you turn so the other drivers can be ready.

How might a driver know if he is at risk of hitting a pothole?

when the red lights are flashing and there is no barrier between his/her vehicle and the bus. How might a driver know if he/she is at risk of hitting a pothole? It is a standing puddle in the road.

What does the ACC setting on an ignition switch do?

The second position is the ACC/ACCESSORY position, which allows you to use your radio, windshield wipers, and other accessories while the engine is off. … When you hear the engine start, release your grip on the key. The ignition switch will then automatically turn to the ‘ON/RUN’ position for driving.

What is an aggressive driver defined as?

According to the National Highway Safety Administration (NHTSA), aggressive driving is when “an individual commits a combination of moving traffic offenses to endanger other persons or property.” … Failing to obey stop signs, yield signs, and other traffic signals. Driving illegally on the shoulder or sidewalk.

When starting a car that has an automatic transmission?

If you are in an automatic transmission car, follow these steps to start the vehicle:Place your key in the ignition and turn it to the ‘on’ (third) position.Press the brake pedal.Switch the gear to Drive (D).Lift your foot from the brake and press the accelerator gradually to start moving. (30)

What should a driver do when he she gets to a speed bump?

What should a driver do when he/she gets to a speed bump? Reduce your speed to a suggested limit. What is the safest thing a driver should do just before driving away? Put on safety belts and put away electronics.

Which of these is a safe thing to do when driving through a tunnel?

When entering a tunnel:listen for updates or important traffic information on your radio.turn on your headlights.take your sunglasses off (unless prescription glasses are required)obey all traffic signs, signals and pavement markings.avoid changing lanes if possible (this improves safety for everybody in the tunnel)More items…•

What must a driver do at a flashing yellow light quizlet?

A flashing yellow light warns drivers to slow down and proceed with caution. Drivers may turn left on a green light. However, drivers must yield the right-of-way if other traffic is approaching from the opposite direction.

What lights should you use in a tunnel?

Explanation: Before entering a tunnel, you should switch on your dipped headlights, as this will allow you to see and be seen. In many tunnels, it’s a legal requirement. Don’t wear sunglasses while driving in a tunnel. You may wish to tune your radio to a local channel for traffic information.